品牌: Emerson | 型号: 990W0125-I0S3S0T1M2K | 材质:铸铁 |
连接形式:对夹 | 加工定制:否 | 密封形式:软密封型 |
压力环境:低压 | 工作温度:常温 | 流动方向:双向 |
形态:蝶式 | 零部件及配件:执行器 |
Keystone卫生抛光蝶阀 KEY 990W0125-I0S3S0T1M2K蝶阀 KEY 990W0100-I0S3S0T1M2K-0000000 keystone耐磨蝶阀F990T620DN100气动蝶阀 keystone耐高温白色密封蝶阀 F990氟胶蝶阀 复合材质蝶阀F990氟胶蝶阀 F990 EPDM/Tflon蝶阀 KEYSTONE阀门 DELONGTAI阀门FIG990 DN100(990W0100-I0S0S0E0M2K) +F89U-006DA KEYSTONE蝶阀 三元乙丙外面包裹着聚四氟乙烯阀座 F990氟胶阀座 EPDM/Tflon蝶阀 F990氟胶蝶阀 EPDM/Tflon蝶阀
keystone蝶阀,凯斯通阀体,凯斯通对夹式气动蝶阀阀体,F990DLT150蝶阀,F990/DLT150I0S0S0E0M8K ,F990/DLT200I0S0S0E0M8K,F990//DLT150I0S0S0E0M8K
F990DLT150+F89U014DA+EP5气动调节蝶阀 KEYSTONE进口气动调节阀
F990DLT125+F89U014DA+EP5气动调节蝶阀 凯斯通进口气动调节阀
F990DLT150+F89U014DA+YT-3300气动调节蝶阀 F990DLT125+F89U014DA+YT-3300气动调节蝶阀
KEYSTONE开关蝶阀 FIG990 DN100(990W0100-I0S0S0E0M2K)+F89U-006DA
keystone气蝶阀F990/T805/DN100
蝶阀 FIG 990 DN200(990W0200-I0S0S0E0M2K)
蝶阀 FIG 990 DN100(990W0100-I0S0S0E0M2K)
Keystone GRW Fig990 DN50 (990W0050-I0S0S0E0M2K
Fig990 DN65 (990W0065-I0S0S0E0M2K)
Fig990 DN100 ( 990W0100-I0S0S0E0M2K)
Fig990 DN125 ( 990W0125-I0S0S0E0M2K)
Fig990 DN150 ( 990W0150-I0S0S0E0M2K)
Fig990 DN200 ( 990W0200-I0S0S0E0M2K)
克西顿蝶阀 DN200,阀板316SS F79U012
F990 DLT200 I0S0S0N0M8K + F89U-020DA + TVA-M2WGNCM
Keystone气动蝶阀 凯斯通气动蝶阀 基斯顿气动蝶阀F990 DLT300 I0S0S0N0M8K + F89U-051DA +DLT100M20 +791 +MENDO 现货 GRW DLT300 D0S0S2E0M1K, 蝶阀GRW DLT300 D0S0S2E0M1K + F89U-051DA +DLT100M20 +791蝶阀
keystone不锈钢对夹式气动蝶阀 DN200.316,耐高温白色密封,不锈钢对夹式气动蝶阀 DN150.316.耐高温白色密封 F990T620DN2000+F89U-020DA, F990T620DN150+F89U-014DA, F991T620DN100蝶阀 F990PTFE/EPDM白色蝶阀阀座 F990蝶阀
F991T620不锈钢蝶阀
keystone气动蝶阀F990F79U791CR
The F990 has smooth flow characteristics, abrasion, erosion and corrosion resistance with a crevice free internal contour.
Features & Benefits:
The one-piece wafer thin disc stem provides the very minimum obstruction to flow.
Rounded, polished disc edge gives full concentric sealing, lower torques, longer seat life and bubble-tight shut-off.
Wafer type split-body for easier maintenance.
Body locating holes provide easy installation and a perfect centring of the valve between the flanges.
Primary stem sealing by preloaded contact between flatted seat surface and rounded polished disc hub area exceeds the pressure rating of the valve and prevents leakage through shaft area to atmosphere.
A secondary sealing is provided by the interference fit between shaft and shaft hole in seat at all positions.
Top bushing absorbs actuator side thrust loads.
A moulded-in O-ring provides flange sealing and eliminates need for gaskets.
The seat is field replaceable and fully isolates the body and stem from the flow.
AS 2129 Table E and ANSI Class 150 end connections as standard. Others available on request.
The F990 is not recommended for dead end service.
PED approved for valves 25-300mm.